Teensy 3.6 (v3,6) USB Mikrocontroller

Hersteller: PJRC
Hersteller-Nr: TEENSY36
Flikto-Nr: TEENSY 3.6
Das Produkt ist leider momentan nicht mehr auf Lager. Bitte kontaktieren sie uns für den nächsten Liefertermin..

The Teensy USB Development Board is a complete USB-based microcontoller development system.

Version 3.6 features a 32 bit 180 MHz ARM Cortex-M4 processor with floating point unit. All digital and analog pins are 3.3 volts. Do not apply more than 3.3V to any signal pin.

All Teensy boards are shipped assembled and fully tested.

Features specific to Teensy 3.6:

180 MHz ARM Cortex-M4 with Floating Point Unit
1M Flash, 256K RAM, 4K EEPROM
Microcontroller Chip MK66FX1M0VMD18 (PDF link)
USB High Speed (480 Mbit/sec) Port
2 CAN Bus Ports
32 General Purpose DMA Channels
22 PWM Outputs
4 I2C Ports
11 Touch Sensing Inputs
Features common to 3.5 and 3.6:

62 I/O Pins (42 breadboard friendly)
25 Analog Inputs to 2 ADCs with 13 bits resolution
2 Analog Outputs (DACs) with 12 bit resolution
20 PWM Outputs (Teensy 3.6 has 22 PWM)
USB Full Speed (12 Mbit/sec) Port
Ethernet mac, capable of full 100 Mbit/sec speed
Native (4 bit SDIO) micro SD card port
I2S Audio Port, 4 Channel Digital Audio Input & Output
14 Hardware Timers
Cryptographic Acceleration Unit
Random Number Generator
CRC Computation Unit
6 Serial Ports (2 with FIFO & Fast Baud Rates)
3 SPI Ports (1 with FIFO)
3 I2C Ports (Teensy 3.6 has a 4th I2C port)
Real Time Clock
Actual size is 2.4 by 0.7 inch