Teensy++ v2,0 USB Board

Teensy++ v2,0 USB Board
Hersteller: PJRC
Hersteller-Nr: TEENSY++
Flikto-Nr: flik.to/1676

28,99 €

inkl. 19% USt zzgl. Versand

6 auf Lager


The Teensy++ breaks out onto a breadboard all of the IO available on the AT90USB1286 so you can connect to a host of peripherals. 

The Teensy++ comes pre-flashed with a bootloader so you can program it using the on-board USB connection. You can program the Teensy in your preferred IDE using C or you can install the 'Teensyduino' add-on for the Arduino IDE and use Arduino sketches. 

 

Specification Teensy 2.0 Teensy++ 2.0 Teensy 3.1
Processor ATMEGA32U4
8 bit AVR
16 MHz
AT90USB1286
8 bit AVR
16 MHz
MK20DX256
32 bit ARM
Cortex-M4
72 MHz
Flash Memory 32256 130048 262144
RAM Memory 2560 8192 65536
EEPROM 1024 4096 2048
I/O 25, 5 Volt 46, 5 Volt 34, 3.3V, 5V tol
Analog In 12 8 21
PWM 7 9 12
UART,I2C,SPI 1,1,1 1,1,1 3,2,1

 

Note: You will need a USB cable (not included)

Dimensions: 50.8mm x 17.8 mm

Features:

  • 8-Bit AVR Processor (AT90USB1286)
  • 128K Flash Memory, 8K RAM, 4K EEPROM
  • USB Can Emulate Any Type of Device
  • Single Pushbutton Programming
  • Arduino Compatible
  • 8 Analog Inputs
  • 46 Digital I/O Pins
  • 9 PWM outputs
  • SPI and I2C

Documents: